INDUSTRIAL RUBBER PARTS

Rubber TubesOur range of products include rubber tube, black nitrile rubber tube, rubber hose tube, neoprene rubber tubes, nitrile rubber tube and black rubber tube.Customised rubber tubes, pipes, sleeves according to drawings, samples and specifications.

RUBBER BOOTS, BELLOWS & DUST COVERAvailable in NBR, Chloroprene, Viton (FKM), Silicone, EPDM, Fluro Silicone, etc.Features

• Offering custom molded Rubber Boots and Dust covers, molded to your specifications.
• Made of various materials like Neoprene and NBR.
• Designed and manufactured as per given specifications of the client.

Bright Indotech Private Limited, Manufacture
Rubber Molded Products
» Rubber O Rings
» Rubber Rings
» Rubber Sealing Rings
» Rubber Quad Rings
» Rubber Bellows
» Rubber Boots
» Rubber Buffers
» Rubber Diaphragms
» Industrial Rubber Grommets
» Rubber Dampers
» Rubber Sleeves
» Rubber Stoppers
» Rubber Washers
» Rubber Strips
» Rubber Pads
» Rubber Parts
» Rubber Caps
» Rubber Seal
» Rubber Oil Seal
» Industrial Rubber Seal
» Rubber Belts

These fully-moulded seals are designed to operate with tube testing machines that repeatedly seal and release the steel tube ends as part of the hydrostatic testing process.

The quality of the seals used is a crucial factor in the reliability of such machines, and therefore our tube test seals offer the highest levels of performance.

Manufactured from high tensile, impact resistant polyurethane, they provide excellent wear resistance and can operature at high or low pressures. They incorporate a special lip profile to enable tube entry without seal damage.    

Manufacturing High quality pu bush, rubber bush according to drawing, samples and specifications.

Customized rubber bushings according to drawing, sample and specifications.

Bright Indotech Private Limited manufacture Compression molding is a process that involves taking a rubber compound or mixed raw material and creating "pre-forms" in the basic shape of the end product. The pre-forms provide a surplus of material to be placed in the cavity, thus ensuring a total cavity fill. Once in place, the mold is then closed, applying both heat and pressure to the pre-form and allowing it to fill the cavity. When the cavity is filled, excess pre-form material spills out into overflow grooves. Following this step the rubber is then demolded, usually by hand, leaving us with the molded rubber product.

Customized pu seals according to drawing, samples, sizes or specifications.

We are offering a comprehensive range of Automotive Rubber Bellows to our clients, which is made using high-grade raw materials such as nitrile, chloroprene, silicone, viton, polyacrylic rubber procured from reputed vendors. Our range is widely known for its effective, smooth and quiet operation and due to the high degree of torrential stiffness our range is maintenance and wear free. Our range is compensated for lateral, axial and angular shaft misalignments and can easily be mounted and dismounted. We provide customized range of products to our clients, which protect movable joints and shafts and optimize the wearing parts life by preventing penetration of dust particles.

Features:

• High flexibility
• High-temperature resistance
• High tensile strength

Request
CallbackHigh quality rubber bellows according to drawings, samples and specifications.

Bright Indotech Private Limited is an OEM Manufacturer Rubber extrusionFeatured snippet from the webRubber extrusion is a part forming process. During this process, a high-pressure extrusion machine forces synthetic or natural rubber materials through a shaped die in order to get it to take on its section profile, shape or cut.Customised rubber extrusion according to drawing, sample and specifications.

Rail Pad

Rail pads are elastic polyurethane mats which are interposed between steel rails and tie sleepers to protect the sleeper top from wearing and impacting. The starting stiffness of a rail pad is designed to not be high so that their relative deformation under the spring clip toe loads is greatly substantial. In this way, it can guarantees the rail pad maintaining in close contact with the rail despite of any vertical movements of the latter. In addition, the reason why rail pads made up of rubber or plastic is to dampen the shocks of vibration of a passing train.

A rail pad is essential in reducing shock and vibration in a rail system. The pad laid under the rail to ensure:

• Load distribution over a larger surface
• Elimination of load concentration and the resultant fatigue stresses
• Centering of loads on the supporting element
• Absorption of uneven contact surfaces between rail and support
• Reduction of noise and vibration
• Sealing between the bottom of the rail and the top of the support
• Reduction of wear of the rail and its support

Bright Indotech Private Limited is an OEM Manufacturer A rubber bush is a type of vibration isolator. It provides an interface between two parts, damping the energy transmitted through the bushing. The bush separates the faces of two metal objects while allowing a certain amount of movement, which helps the suspension parts to move freely.

 We manufacture Rubber Bushings of different shapes & sizes made from a variety of rubber grades like Neoprene, Nitrile, Silicone, EPDM, Viton, or Natural Rubber. We can also manufacture them according to customer’s specific requirements.

 Applications: Automobile Industry, Balancing Machines, Gears & Motors, Pumps, Blowers, Vibrators, Couplings, etc.Rubber Bushing for automobile and industrial sector, customization according to drawing, sample and specifications.