INDUSTRIAL RUBBER RINGS

we are committed to delivering not just quality molded rubber components on time, but also delivering the best customer experience throughout the entire process, for the life of the relationship.

• Leak proof
• Excellent finishes
• Long lasting

Price Range:

• Approx. price Rs. 10 to 100 per pc.

A V-Ring is a solid rubber seal used on shafts to prevent dirt, moisture, and other unwanted material from entering an oil seal, housing, or any other desired area while simultaneously keeping lubricants in. It works by stretching over the shaft to create a tight seal along the shaft while the flexible lip seals lightly against the counterface at a right angle to the shaft.

The V-Ring works well on its own and excels when combined with rotary shaft seals and helps extend the life of bearings, oil seals, and shafts. Gamma Seals provide the same function as V-Rings, but with the added protection of a metal case

1. No wear on shaft
2. Low friction
3. High rotational speeds possible
4. No special requirements on shaft; no groove required
5. Easy to mount
6. Excellent durability
7. Single element sealing solution
8. Dynamic friction reduces with increasing peripheral speed due to the centrifugal force

V-rings are rubber face seals. The V-ring is mounted on the shaft and seals the counter surface. A V- ring is produced slightly smaller than the shaft itself, causing it to clamp onto the shaft. The lip of the seal prevents liquids and dust from the outside. When the rotational speeds increases, centrifugal forces act on the sealing lip which reduces contact pressure. This effect allows the V-rings to be used at higher rotational speeds at very low friction losses.

• Fine finish
• Simple mounting
• Heat resistance

Price Range:

• Approx. price Rs. 10 to 100 per pc.

Working at -45ºC..+230ºC practically in any oils and fuels, in many agressive medias, material of high wear, 95% resourse - not lower then 200000 km mileage of automibile or 10 000 hours of work on tractors, engines and ship mechanisms, while operating in other units - the GOST guarantee is 2 500 h.

Field of application: agricultural machinery, tractor, military, armored vehicles, engines and transmissions of cars, trucks and buses, combines and harvesting equipment, power stations and power plants, aviation, rocket and space equipment, oil and gas and chemical industry, electric motors and reductors, pumps and pumping corrosive liquids aggregates, mining and heavy engineering, machine tool building, rolling stock of railways, other branches of the economy - with a view to substantially increasing Resource of previously used seals, reduction of undesirable downtime and dangerous leaks. Fluoroelastomer, unlike standard nitrile rubber and silicone, works in hypoid gear oils with a large number of sulfur-containing EP additives at a temperature above + 80ºC, and also compatible with most types of motor oils.

EPDM (ethylene-propylene-diene-monomer) has excellent resistance to ozone, sunlight, severe weather conditions, oxygen, acids, alkalis, ketones, and aging; outstanding color stability, odor-free characteristics, high heat resistance and dielectric qualities.  All of this makes it ideal for outdoor applications and as a general purpose gasket material for air, hot and cold water, saturated steam.  EPDM rubber gasket material is used for parts in the appliance industry; as low pressure boiler gaskets; weather stripping, boots, dust covers, sleeves, mounts.   It has a poor resistance to fuels and oils. 

Specifications of the EPDM rubber sheet available:
Polymer: Ethylene-Propylene-Diene-Monomer
ISO/ASTM Desgination: EPDM
Durometer Rating (hardness):  40, 60, 70
Temperature Range:  -40°F to +225°F
Elongation:  350%
Tensile Strength:  1100 PSI
Finish:  Plate
Widths:  36", 48"
Guage (thickness):  1/16", 1/8", 3/16", 1/4"
Pressure Sensitive Adhesive (PSA):  available upon request
Grades:  Commercial, FDA, Peroxide Cured
Other Types of EPDM Material Available:  Yes

• Approx. price Rs. 10 to 100 per pc.